<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=593372994460473&amp;ev=PageView&amp;noscript=1">

Maintenance Tips For Your Industrial Floor Waxer

 

Any industrial equipment will have to be maintained at some point to keep it performing optimally. This is the case with floor waxers, which need regular maintenance and care to keep them functioning well for a long time. 

Numerous aspects of an industrial floor waxer will need attention from time to time, such as engine oil, filters, and so on. This article discusses everything you need to know about maintaining your floor waxer so that it performs optimally for as long as possible.floor waxer uses

What Is A Floor Waxer Used For?

Floor waxers are used primarily to apply wax to floors. Waxers can be handheld, semi-automatic, or automatic. They can also be floor machines that are often used to apply finishing coatings. In an industrial setting, waxers are often used to apply floor coatings.

A floor coating is a protective coating applied to the floor to make it more slip-resistant. This can be extremely useful in areas where people constantly walk on the floor, such as a kitchen or factory floor.

A floor waxer can apply strippers, sealers, and other floor coatings. They can also be used to strip off old or damaged coatings. This can be used in various settings, including warehouses and factories.

Daily floor scrubber maintenance would ensure the machine is running in optimal condition and help prevent any unnecessary breakdowns.mastercraft-floor-scrubber

Types Of Floor Waxers

An industrial floor scrubber is a type of floor waxer used to clean and maintain industrial floors. Floor scrubbers are typically much larger and more powerful than home floor scrubbers. Specific floor scrubber maintenance will be required to keep these machines running correctly.

 

Handheld Waxers

These waxers are handheld and can be used for smaller tasks such as applying wax to one room. They are generally the least expensive of the three types.

 

Semi-Automatic Waxers

These waxers can be used for larger tasks, such as waxing an entire floor but are generally not powerful enough for larger tasks, such as stripping or applying multiple coats.

 

Automatic Floor Waxers

These waxers are used for larger-scale jobs such as waxing an entire floor. Automatic waxers are often used to apply multiple coats of wax. They are also generally powerful enough to strip floors.

Industrial Floor Waxer Maintenance

Like all other industrial equipment, floor cleaning equipment needs to be regularly maintained to ensure optimal performance and a long lifespan. Service and repair costs on floor cleaning machines can be expensive, so it's essential to do everything you can to keep your machine running smoothly.

Regular maintenance will help extendd the life of your waxer and ensure it works properly. Here are some floor scrubber maintenance tips to keep in mind:

 

mastercraft-floor-scrubber-brush

Clean The Pads And Brushes

A floor scrubber uses spinning pads or brushes to clean the floor. Over time, these pads and brushes will become clogged with dirt and debris. This can cause the waxer to work less efficiently and can even damage the floor.

After each use, clean the pads and brushes with soap and water. This will remove any build-up of wax or dirt that can cause problems.

 

Check The Power Cord

Weekly floor scrubber maintenance is ideal for keeping your machine running smoothly. Checking the power cord is an integral part of this process. Look for any fraying or damage to the cord.

Make sure the power cord is in good condition and not damaged. If it is damaged, replace it immediately.

 

Store The Waxer Properly

Store it in a dry, cool place when you're not using the waxer. Avoid storing it in direct sunlight or near heat sources. Solution and recovery tanks should be empty when the waxer is stored. The solution tank should be rinsed out with clean water, and the recovery tank should be emptied.

 

Check And Change Engine Oil

The engine oil is one of the most critical aspects that must be checked regularly. It lubricates the moving parts within the engine, keeping them clean and minimizing wear to extend the engine's life.

Some industrial floor waxers use mineral oil for the engine, while others use synthetic oil. Whether synthetic or not, the oil should be checked regularly to ensure sufficient oil in the engine. If the oil level is low, the engine will overheat and be damaged.

If you are using SAE 30 or 40 oil, change it every 300 hours of operation. If you are using SAE 10W-30 oil, change it every 1000 hours of operation. If you are using SAE 10W-40 oil, change it every 2000 hours of operation.

 

Replace Filters

Industrial floor waxers use various filters for different purposes, such as air, oil, fuel, and coolant filters. Each of these filters helps remove contaminants from the working parts of the floor waxer, ensuring that they operate smoothly. These filters should be regularly checked and replaced when necessary.

Air filters – Air filters are usually located at the top of the engine. These filters should be checked and cleaned every 100 hours and replaced every 500 hours.

Oil filters – Oil filters are placed near the oil tank. These filters should be checked every 100 hours of operation and replaced every 500 hours of operation.

Fuel filters – Fuel filters are placed near the fuel tank. These filters should be checked and replaced every 500 hours of operation.

Coolant filters – Coolant filters are placed near the coolant tank. These filters should be checked every 100 hours of operation and replaced every 500 hours of operation.

 

Adjust The Temps

Floor waxers are equipped with sensors that indicate the temperature of the engine parts. These sensors help the operator determine when the waxer should be stopped and when it should be shut off for repairs. You should adjust the engine temperature settings based on the parts that need to be checked.

Engine temperature – The engine's temperature should be between 160 and 180 degrees Fahrenheit.

Oil temperature – The oil temperature should be between 60 and 80 degrees Fahrenheit.

Coolant temperature – The coolant temperature should be set at 100 degrees Fahrenheit.

 

Grease Zerk Points

Zerk points are where grease is injected into the moving parts of the waxer. These parts include the gearboxes, the bearings, and axles and shafts. Grease is an essential part of industrial floor waxers, as it helps to reduce wear and tear on the moving parts. It also keeps them clean and free of debris.

You should check the zerk points every 100 hours of operation and apply grease as needed. Though, there are several things to keep in mind when performing this task. First, you should always follow the manufacturer’s instructions on grease.

Next, you should wear gloves to protect your hands from any grease that might get on them. Finally, you should wear eye protection, as grease can splatter and get into your eyes.

 

Shining The Discs

The discs, the rotating parts at the back of the waxer, are often made from high-quality steel. However, these discs can get rusty, leading to uneven wear and reduced performance.

You can clean them, though, by applying a thin film of rust remover and sanding them lightly. After that, you should apply a rust inhibitor to prevent corrosion.

 

Check The Brake Fluid And Brake Cables

Many floor waxers are equipped with a brake system, which stops the discs when they have reached the end of the waxing cycle. The brake fluid, usually housed near the brake cables, should be checked regularly.

You should replace it with fresh brake fluid if it has been contaminated with water. The brake cables can get worn and damaged, reducing braking ability. You can check these cables and replace them if you notice any damage.

 

Check The Transmission Fluid And CV Joints

The transmission fluid and CV joints are essential components of any floor waxer. You should check these parts regularly to ensure that they are working properly. If the transmission fluid is contaminated with water, you should replace it with fresh transmission fluid. You should also check the CV joints to ensure they are working properly.

 

Waxer Blade Maintenance

The waxer blade is the part of the floor waxer that applies the wax to the floor. As such, it is vital to keep the blade in good condition. You can do this by cleaning the blade regularly. You can also coat the blade with a thin film of rust inhibitor to prevent corrosion.

These are some of the crucial aspects of an industrial floor waxer that will need attention from time to time. If you know how to maintain your waxer, you can extend its life and keep your facility looking great.mastercraft floor waxer tips

Final Thoughts

An industrial floor waxer is a valuable piece of equipment for any business. These machines can help to keep your floors looking clean and shiny. However, like all machinery, they require maintenance from time to time. An automatic floor scrubber can also be an excellent complement to an industrial floor waxer.

Following these maintenance tips can help keep your industrial floor waxer in top condition. Regular maintenance will extend the life of your waxer and ensure it works properly.

0 comments